Series 148 DC Gear Motor

Hansen Corporation’s line DC Gear Motors features a Permanent Magnet DC motor mounted to our standard Synchron Gear Train. These motors are available in over 360 gear ratios, 800 output shaft designs, and 5 mounting configurations.

The standard Synchron gear train is rated up to 30 oz-in (212 mN-m) and used in ratios less than 300:1. Hansen’s one-way and two-way slip clutches can be used in many ratios for additional gear protection.

For higher ratios and torque requirements, our heavy-duty gear train rated at 98 oz-in (692 mN-m) is available on request.

The Permanent Magnet DC Motor is available in voltages ranging from 6 to 48 volts and features permanently lubricated sintered bearing. Motor life is dependent on speed, torque requirements, duty cycle, and start-stop cycles.

Hansen Corporation’s complete product line includes Stepper, DC, Clock Movements, and Synchronous motors.

Please contact Hansen Corporation Sales Department at (812)385-1463, fax (812)385-3013, email sales@hansen-motor.com, or visit our website at www.hansen-motor.com for additional product information.

Hansen Corporation
901 S First Street
Princeton, IN 47670